6.2
The setup parameters can be set by using the “PrinterSet” software tool available on
www.custom4u.it.
For a detailed description of the device operating parameters see the following paragraphs.
Start “PrinterSet” software tool.
Click on LOAD > FROM DEVICE and select
the device connected to the PC.
From Device
From File
SAVE
PORT
LOAD
Select a configuration file as follows:
Click on LOAD > From file and select a .psc file on your PC
Drag and drop a .psc file
Connect the device to a PC directly (see paragraph 4.5),
without using HUB devices.
2
3
1
Collegare il dispositivo ad un PC in maniera diretta (vedere paragraph 4.2),
senza l’utilizzo di dispositivi HUB.
47
To Next Page
Loading...
Need help?
General
