ENVIRONMENTAL CONDITIONS
Operating temperature from -20°C to +70°C ±10%
Relative humidity from 10% to 80% Rh
Storage temperature from -20 °C to 70 °C
Storage relative humidity from 10% to 90% Rh
NOTES:
(1)
: For ticket width = 60mm do not exceed a max length of 250mm.
(2)
: For paper from 90g/m
2
to 110g/m
2
enable the dispenser continuous mode with command (0x1D 0x65, see Command
Reference).
(3)
: It is recommended to use an external shock absorber for rolls with a diameter higher than or equal to 100mm.
(4)
: Referred to model without paper holder support.
(5)
: Referred to model with paper holder support.
(6)
: Referred to the UL measurements (High speed, Density = 50% dot on, Print density = +25%, Current = Normal).
(7)
: Referred to “Normal” value for “Current” parameter (see Printer Setup).
(8)
: Referred to a standard CUSTOM receipt (L = 10cm, Density = 12.5% dots on.
59
To Next Page
Loading...
Need help?
General
