APPENDIX B - Trouble Shooting
If problems occur, verify the installation of the camera with the instructions in this manual and with
other operating equipment. Isolate the problem to the specific pieces of equipment in the system and
refer to the equipment manual for further in formation.
Problem Possible Solution
a. Press 5 button then DVR button when you forget
the password once the controller is turned off then
on. The controller will be initialized to Default
Password, 8888.
If you forget the password
a. Please check the ID, Protocol, Baud Rate and
Address of the camera and then clarify of them in
the controller.
If the camera is not working
b. Please check the wiring connection between the
controller and the junction box.
a. Please check the main power and power If the controller is not
working consumption of the controller unit.
b. Please check if the controller is in the lock mode.
29
To Next Page
Loading...
Need help?
General