CYBEX Cloud Q Manual

The Infant Carrier and base is installed so that the infant is facing rearwards. This provides the best position
in a crash for infants. However, no child restraint can guarantee absolute protection from injury in every crash,
so to ensure that your child gets all the protection designed into this restraint.
Carefully read all the instructions for installation in this book. If in doubt about the method of installation,
consult Cybex or agent or a child restraint fitter or, in New Zealand, to consult the agent for the vehicle.
The Cloud Q is suitable for fitting to a variety of Cybex Strollers using one of the adaptor systems.
For compatible Strollers like CYBEX Priam and M-Strollers, refer to www.cybex.com. Works perfect
together with CYBEX Priam and M-Strollers.
Welcome to the CYBEX family
Thank you for purchasing the CYBEX Cloud Q. We are proud to bring this German engineered product to
Australia. We hope the Cloud Q will make your child’s travel both safer and more pleasant as well as make
installation and use for you as simple as possible.The award winning Cloud Q brings a few important safety
innovations to the infant car seat category.
04
INTRODUCTION (Continued)
CYBEX Linear Side-impact Protection (LSP) System: A unique telescoping blocker arm, combined with
deep side wings lined with thick energy-absorbing EPS foam and an adjustable headrest creates the CYBEX
LSP System. This system has been optimized to protect and greatly reduce any forces on your baby in the
event of a side impact crash. (See Page 27)
Full Recline Backrest: A new function of the Cloud Q is that it can be changed to a full recline position when
used outside of the car. With an extended leg-rest and a fully reclining backrest, the child can lie comfortably
and in an ergonomically correct position when used as a travel system or in the home. (See Page 20)
PLEASE READ AND FOLLOW THESE INSTRUCTIONS EXACTLY and only use Cybex
recommended parts and accessories.
ALWAYS store the instruction book in the place provided.

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm