EasyManuals Logo

CYBEX LCX-425T User Manual

CYBEX LCX-425T
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Cybex 425T Treadmill Owner’s Manual
Safety
Page 1-1
1 - Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your
area match the voltage of the treadmill that you have received. The power requirements for the Cybex
425T treadmill include a grounded, dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz
and 15 amps; 208/220 VAC, 60 Hz and 10 amps or 230 VAC ±5%, 50 Hz and 10 amps. See the serial
number decal for the exact voltage requirements of your treadmill.
WARNING: Do not attempt to use this unit with a voltage adapter. Do not attempt to use this unit
with an extension cord.
WARNING: Do not plug more than one unit into a single circuit.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER:
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a quali ed electrician or service provider if you are in doubt as to whether
the treadmill is properly grounded. Seek a quali ed electrician to perform any modi cations to
the cord or plug. Cybex is not responsible for injuries or damages as a result of cord or plug
modi cation.
This treadmill is for use on a nominal 115 VAC
±5%, 60 Hz and 15 amps, 208/220 VAC; 60 Hz,
10 amps or 230 VAC ±5%, 50 Hz and 10 amps
and a grounded, dedicated circuit. Make sure
that the treadmill is connected to an outlet having
the same con guration as the plug. Do not use a
ground plug adapter to adapt the power cord to a
115V Euro Plug 208/220V UK
NEMA 5-15 CEE 7/7 NEMA 6-15 230VAC

Other manuals for CYBEX LCX-425T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX LCX-425T and is the answer not in the manual?

CYBEX LCX-425T Specifications

General IconGeneral
BrandCYBEX
ModelLCX-425T
CategoryTreadmill
LanguageEnglish

Related product manuals