1- Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage
requirements for your area match the voltage of the treadmill that you have
received. The power requirements for the Pro treadmill include a grounded,
dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz and 20
amps; 208/220 VAC, 60 Hz, 15 amps or 230 VAC ±5%, 50 Hz and
15 amps. See the serial number decal for the exact voltage requirements of
your treadmill.
! WARNING: Do not attempt to use this unit with a voltage adapter.
Do not attempt to use this unit with an extension cord.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
! DANGER:
Improper connection of the
equipment-grounding
conductor can result in a risk of
electric shock. Check with a
qualified electrician or service
provider if you are in doubt as
to whether the treadmill is
properly grounded. Seek a
qualified electrician to perform
any modifications to the cord
or plug. Cybex is not
responsible for injuries or
damages as a result of cord or
plug modification.
This treadmill is for use on a
nominal 115 VAC ±5%, 60 Hz and
Cybex Pro Treadmill Owner’s & Service Manual
Page 1-1
Table of Contents . . . . . . . . . . . iii
1 Safety
Important Voltage Information . 1-1
Grounding Instructions . . . . . . . 1-1
Important Safety Instructions . . 1-2
Warning Decals. . . . . . . . . . . . . 1-4
Caution Decals . . . . . . . . . . . . . 1-7
Emergency Stop Key (e-stop). . 1-8
115V Euro Plug 208/220V
NEMA 5-20 CEE 7/7 NEMA 6-15
To Next Page
Loading...
Need help?
General
