CYBEX V Series - Tools Required; Remove Motor Cover

Tools Required
• Phillips screwdriver
• 9/16" Wrench (2)
• 9/16" Socket 3/8" Drive
• 13 mm Socket
• 13 mm Wrench
• 3" Extension 3/8" Drive
• 3/8” Drive ratchet
Remove Motor Cover
1. Remove screws securing motor cover to base assembly using a Phillips screwdriver.
QtyDescriptionItem
1Motor Cover1
1Base Assembly2
4
Screw, M4.2 x 19mm Phillips
Head
3
2. Remove motor cover.
Page 16 of 31