CYBEX V Series Assembly Instructions

3. Install plastic grommets to front crossbar.
QtyDescriptionItem
2Plastic Grommet1
2Cable Tie2
1Console Cable3
Note: For international units, install the ferrite approximately 7 inches from the center of the bridge.
Route console cable through ferrite and secure with cable tie.
QtyDescriptionItem
1Ferrite1
1Cable Tie2
1Console Cable3
Install Upper Dashboard Tray
1. Install screws securing bar backing plate to front crossbar using a Phillips screwdriver.
QtyDescriptionItem
2Ergo™ Bar Backing Plate1
2
Screw, #10 x 0.5” Phillips Head
(black)
2
Page 21 of 31

CYBEX V Series Specifications

General

Brand	CYBEX
Model	V Series
Category	Treadmill
Language	English