Cylon CBX series User Manual

DS0119 rev 40 ©2018 Cylon All Rights Reserved. Subject to change without notice
WWW.CYLON.COM
WWW.CYLON-AUTOMATRIX.COM
page 1 of
14
TECHNICAL DATASHEET & INSTALLATION GUIDE
CBX System
CBX System
CBX-8R8|CBX-8R8-H|FLX-4R4|FLX-4R4-H|FLX-8R8|FLX-8R8-H|FLX-16DI
DESCRIPTION
The CBX-8R8(-H) is a fully programmable BTL-listed BACnet®
Advanced Application Controller (B-AAC) that communicates on
an RS-485 local area network using the BACnet® MS/TP protocol.
This controller features 8 UniPuts™ with Relay and 8 Universal
Inputs as well as support for up to three FLX (Field Level
eXpansion) series extension modules providing up to 64 points
of control. FLX expansion modules are available in a variety of
options to allow maximum flexibility in achieving the required
point configuration.
The CBX-8R8(-H) is designed for a wide range of applications for
intelligent control of HVAC equipment, lighting control, and
electrical systems including metering applications.
APPLICATION
The CBX-8R8(-H) is suitable for controlling various equipment
such as; air handling units, boilers, chillers, cooling towers, pump
systems, central plant equipment, variable frequency drives,
lighting control and metering. The controller supports multi-
protocol communications simultaneously including BACnet®
MS/TP and Modbus® RTU.
The fully programmable CBX-8R8(-H) can be tailored to meet a
variety of applications by creating and modifying strategies using
Cylon's CXpro
HD
programming interface.
Product Selection Chart
Part Number
Module
Service
UniPuts
TM
with Relay
1
Universal
Inputs
Digital
Inputs
Modbus
RTU
Devices
CBT-STAT
Bus
HOA
Switch
& Pot.
18 V
Aux
Power
FLX
I/O
Modules
CBX-8R8
Main
Controller
8 8 0 4
*
1 3
CBX-8R8-H
Main
Controller
8 8 0 4
*
1 3
FLX-4R4
Expansion
Module
4 4 0 0 0 -
FLX-4R4-H
Expansion
Module
4 4 0 0 0 -
FLX-8R8
Expansion
Module
8 8 0 0 0 -
FLX-8R8-H
Expansion
Module
8 8 0 0 0 -
FLX-16DI
Expansion
Module
0 0 16 0 0 -
Note: 1 – UniPuts
TM
are software configurable for point types AI, DI, AO or DO-R.
Note: * – CBX Modbus® RTU supports a total of 40 points across 4 devices
CBX-8R8
8 UniPuts™ + Relays
hardware connections that can be used as
inputs, outputs or relays (software selectable)
8 Universal Inputs
CBX-8R8-H
Including Hand/Off/Auto Local Override
Function
Field Level eXpansion Modules
FLX-4R4
4 UniPuts™ with Relay
4 Universal Inputs
FLX-8R8
8 UniPuts™ with Relay
8 Universal Inputs
FLX-16DI
16 Digital Inputs
FLX-4R4-H, FLX-8R8-H
Including Hand/Off/Auto Local Override
Function
Support for Cylon smart thermostat bus
LED status on all I/O channels provides
indication of fault or override status
Compact form factor to maximize enclosure
space
Scalable from 16 points to 64 points using FLX
modules
Easy module expansion using simple bus
connectors
Up to 64 Trendlogs, 1024 entries per Trendlog
Accurate Universal Inputs support a variety of
thermistors and RTDs that range from 0 to 450 kΩ
INSTALLATION GUIDE : see page 5

Cylon CBX series Specifications

General

Brand	Cylon
Model	CBX series
Category	Controller
Language	English

Summary

DESCRIPTION

APPLICATION

SPECIFICATIONS

MECHANICAL

Physical dimensions, enclosure type, and mounting methods for CBX system.

INPUTS / OUTPUTS

Detailed specifications for UniPuts, Universal, and Digital I/O configurations.

ELECTRICAL

Power supply requirements, ratings for CBX and FLX modules, and power connections.

PROCESSOR

Information about the controller's internal processor, clock speed, and memory.

COMMUNICATIONS

Details on serial ports, BACnet MS/TP, Modbus RTU, and FLX bus interfaces.

SOFTWARE FEATURES

Key software capabilities like strategy blocks, trendlogs, and data security.

INTERFACE

Specifies the engineering software used for system configuration and programming.

DIMENSIONS

WIRING

SYSTEM ARCHITECTURE

INSTALLATION GUIDE

TERMINALS

Details the function and wiring of all terminal connections on CBX and FLX modules.

SERVICE PORT AND DIP SWITCHES

Explains the Micro USB service port and the function of MS/TP and FLX bus address DIP switches.

OUTPUT OVERRIDE CONTROLS

Describes the hardware override switches for output control on HOA variants.

INDICATOR LEDS

Explains the status indications provided by the Red, Green, and Yellow indicator LEDs.

APPLY POWER AND MS/TP ADDRESSING

Covers applying power and setting the MS/TP address for the CBX controller.

MS/TP NETWORK CONNECTION

Details how to connect the CBX controller to the MS/TP network via RS-485.

TERMINATE THE MS/TP NETWORK

Instructions on how to correctly terminate the MS/TP network.

CONFIGURE FOR BACnet® COMMUNICATIONS

Steps for configuring the CBX for BACnet communications, including default settings.

CONNECTING TO FLX UNITS

Guide on connecting and configuring FLX expansion modules to the CBX controller.

JOIN OR TERMINATE FLX BUS

Instructions for connecting FLX modules and terminating the FLX bus.

SET UP FLX BUS EXTENSION

Guidance on extending the FLX bus using cables and remote connectors.

ADD CONTROLLER TO SITE

Steps to add the CBX controller and its FLX modules within the Cylon configuration utility.

SET UP CONTROLLER STRATEGY

Guidance on creating and configuring the controller's strategy using CXproHD software.

OPERATION

INPUTS AND OUTPUTS

Details the I/O capabilities and configuration of CBX and FLX modules.

INPUT MODES

Explains different input configurations like Resistance, Voltage, and Current.

CURRENT INPUT MODE

Specifics on using the current input mode for active sensors.

OUTPUT MODES

Covers Analog and Digital output modes for UniPut™ terminals.

RELAY MODE

Describes how UniPuts™ are configured for relay output.

AUXILIARY POWER OUTPUTS

Details the 18V DC auxiliary power outputs for I/O devices.

USING A KEYPAD WITH THE CBX

Information on connecting and using a CBT-STAT or UCU Room Display keypad.

OUTPUT OVERRIDE