cypress solutions CTM-ONE - LED Indicators

© 2021 Cypress Solutions Manual: CTM-ONE (Revision 1.0)
28
Additional Features
The following table is provided to assist application integrators in defining the power requirements for their
specific application. The overall power consumption is related to the overall “duty cycle” of the device.
Fixed site applications requiring infrequent polling will require a low duty cycle whereas a mobile solution will
require a higher duty cycle to account for accurate geo-location.
Power
Consumption
mW(@12V)
Typical time
Standby Mode
1.2-40 mW
Variable based on duty cycle.
Operating System
Mode
300-400
mW
15-60 seconds/session based on data processing/sensing. For
Mobile applications device will be typically operate continuously in this
mode while the vehicle is in operation.
Transmit
1200 mW
1-3 seconds/session