EasyManua.ls Logo

cypress solutions CTM-ONE - Notice; Operation in Hazardous;Restricted Environments; Regulatory Restrictions; Electromagnetic Interference (EMI) - United States FCC Information

cypress solutions CTM-ONE
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2021 Cypress Solutions Manual: CTM-ONE (Revision 1.0)
4
Due to the nature of wireless communication, the reception or transmission of data can never be
guaranteed. Data may be delayed, corrupted, or never received. Data transfer problems are rare with well-
constructed and configured wireless networks used in conjunction with devices such as the CTM-ONE
wireless data device. Cypress Solutions Inc. accepts no responsibility for damages of any kind including, but
not limited to personal injury, death, or loss of property due to the delay or loss of data resulting from the
use of the CTM-ONE wireless data device.
Wireless transmitters can cause interference with some critical operation equipment. For this reason, it is
required that the RF portion of the CTM-ONE wireless data device be turned off when in the vicinity of
blasting operations, medical equipment, life support equipment, or any other equipment that is susceptible
to radio interference. The CTM-ONE wireless data device must be turned off when on-board or in the vicinity
of any aircraft. The FAA prohibits the use of wireless transmitter equipment at any time during aircraft flight.
CAUTION: Any modifications to the CTM-ONE wireless data device not expressly authorized by Cypress
Solutions Inc. may cause its regulatory approval status to become invalidated, thereby voiding your
authority to use the product.
The CTM-ONE wireless data device contains a wireless module approved under FCC CFR 47 part 2.1091 and
Industry Canada RSS-102 rules for operation as a mobile or fixed device with its specified antenna of gain
≤6dBi and from which a separation distance of at least 20 cm (8”) must be maintained from all persons at all
times and during all modes of operation. If external antennas are used the antennas used must not be co-
located or operated in conjunction with any other antenna or transmitter. These rules are in place to prevent
any possible hazard due to personal exposure to electromagnetic radiation.
CTM-ONE devices are designed to operate with the approved wireless module installed. The module has its
own FCC and Industry Canada approval ID number.

Other manuals for cypress solutions CTM-ONE

Related product manuals