• One Ethernet port (bridged/non-bridged)
• Ethernet services can be disabled
• Ethernet ports can use DHCP or static IP addresses, DHCP can be configured to a single IP address
• Gateway support when an Ethernet port is used to connect to the Internet through another router
• Static NAT support
• 14 position interfaces
• Inputs x 4 (2 differential)
• Outputs x 4
• Console, Command Line Interface access
• PAD host interface (1 available), Virtual Serial Line replacement
• MODBUS host interface, MODBUS interface
• Various auxiliary device support (contact Cypress Solutions for more details)
• 10 position interfaces
• Auxiliary equipment interface
• iButton™ interface access control hardware interface
• USB device port
• 8 position interfaces including power
• Automotive CAN support (J1939, OBD2/ISO15765-4)
To Next Page
