D-Link DAP-1513 - LAN Network Settings Configuration

20D-Link DAP-1513 User Manual
Section 3 - Conguration
LAN Settings
This section will allow you to change the local network settings of the MediaBridge® and to congure the DHCP settings.
LAN Connection
Type:
Device Name:
Use the drop-down menu to select Dynamic IP
(DHCP) to automatically obtain an IP address on
the LAN/private network.
Enter the Device Name of the DAP-1513. It is
recommended to change the Device Name if
there is more than one D-Link device within the
subnet.