D-Link DAP-2695 Command Line Interface Reference Manual

802.11 b/g /n Access Point Command Line Interface Manual
18
Multi-SSID[index]
get multi-backup-acctport
Display Backup Accounting port number of Multi-SSID[index]
get multi-backup-acctport [index]
get multi-backup-radiusip
Display Backup RADIUS server IP address of Multi-SSID[index]
get multi-backup-radiusip [index]
get multi-backup-radiusport
Display Backup RADIUS port number of Multi-SSID[index]
get multi-backup-radiusport [index]
get multi-d-wepkeylen
Display 802.1X dynamic WEP Key Length of Multi-SSID[index]
get multi-d-wepkeylen [index]
get multi-d-wepkeyupdate
Display 802.1X dynamic WEP Rekey Interval of
Multi-SSID[index]
get multi-d-wepkeyupdate [index]
get multi-radiusip
Display RADIUS server IP address of Multi-SSID[index]
get multi-radiusip [index]
get multi-radiusport
Display RADIUS port number of Multi-SSID[index]
get multi-radiusport [index]
get multi-agbyrssiordrstatus
Display aging out by rssi/data rate status
get multi-agbyrssiordrstatus
get multi-aclbywlmodeperssid
Display acl by wlan mode status per ssid
get multi-aclbywlmodeperssid
get multi-aclbyrssi
Display acl by rssi status
get multi-aclbyrssi
get multi-agingbyrssithreshhold
Display aging out by rssi threshhold
get multi-agingbyrssithreshhold
get multi-aclbyrssithreshhold
Display acl by rssi threshhold
get multi-aclbyrssithreshhold
get multi-agingbydataratethreshhold
Display aging out by datarate threshhold
get multi-agingbydataratethreshhold
Set Command:
Function
Syntax
set multi-state
Set Multi-SSID state
set multi-state
set multi-pri-state
Set Multi-SSID pripority state
set multi-pri-state
set priority
Set priority of primary SSID
set priority
set multi-defkeyindex
Set Default Key Index [1-4] of Multi-SSID[index]
set multi-defkeyindex
set multi-wepkey
Set Encryption Key (index:1--4) of Multi-SSID[index]
set multi-wepkey [index]
set multi-ssid
Set ESSID of Multi-SSID[index]
set multi-ssid [index]
set multi-ssidhidden
Set ssid hidden state of Multi-SSID[index]
set multi-ssidhidden [index]
set multi-auth
Set Authentication Type of Multi-SSID[index]
set multi-auth [index]
set multi-priority
Set priority of Multi-SSID[index]
set multi-priority [index]
set multi-wmm
Set WMM state of Multi-SSID[index]
set multi-wmm [index]
set multi-cipher
Set Cipher type of Multi-SSID[index]
set multi-cipher [index]

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm