D-Link DAP-2695

802.11 b/g /n Access Point Command Line Interface Manual
28
10
DHCP SERVER COMMANDS
Get Command:
Function
Syntax
get dhcp_dns
Display dhcp server dns ip
get dhcp_dns
get dhcp_endip
Display dhcp server end ip
get dhcp_endip
get dhcp_gateway
Display dhcp server gateway ip
get dhcp_gateway
get dhcp_leasetime
Display dhcp server leasetime
get dhcp_leasetime
get dhcp_netmask
Display dhcp server netmask
get dhcp_netmask
get dhcp_server
Display dhcp server netmask
get dhcp_server
get dhcp_startip
Display dhcp server start ip
get dhcp_startip
get dhcp_sta_expire
Display dhcp server sta's expire time
get dhcp_sta_expire
get dhcp_sta_hostname
Display dhcp server sta's hostname
get dhcp_sta_hostname
get dhcp_sta_mac
Display dhcp server sta's mac
get dhcp_sta_mac
get dhcp_sta_ip
Display dhcp server sta's ip
get dhcp_sta_ip
get dhcp_staticip_mode
Display dhcp server static mode states
get dhcp_staticip_mode
get dhcp_staticip_ip
Display dhcp server static mode ip
get dhcp_staticip_ip
get dhcp_staticip_mac
Display dhcp server static mode mac
get dhcp_staticip_mac
get dhcp_staticip_hostname
Display dhcp server static mode hostname
get dhcp_staticip_hostname
get dhcp_staticip_pool_state
Display dhcp server static mode pool state
get dhcp_staticip_pool_state
get dhcp_wins
Display dhcp server wins ip
get dhcp_wins
get dhcp_force_broadcast
Display server force broadcast states
get dhcp_force_broadcast
Set Command:
Function
Syntax
set dhcp_dns
Set dhcp server dns ip
set dhcp_dns