D-Link DAP-2695

802.11 b/g /n Access Point Command Line Interface Manual
29
set dhcp_endip
Set dhcp server end ip
set dhcp_endip
set dhcp_gateway
Set dhcp server gateway ip
set dhcp_gateway
set dhcp_leasetime
set dhcp server lease time
set dhcp_leasetime
set dhcp_netmask
set dhcp server netmask
set dhcp_netmask
set dhcp_server
Set dhcp server states
set dhcp_server
set dhcp_server_static_ip_mode
Set dhcp server static ip mode states
set dhcp_server_static_ip_mode
set dhcp_startip
Set dhcp server start ip
set dhcp_startip
set dhcp_staticip_set_disable
Set dhcp staticip disable
set dhcp_staticip_set_disable
set dhcp_staticip_set_enable
Set dhcp staticip enable
set dhcp_staticip_set_enable
set dhcp_staticip_set_hostname
Set dhcp staticip's hostname
set dhcp_staticip_set_hostname
set dhcp_staticip_set_ip
Set dhcp staticip's ip
set dhcp_staticip_set_ip
set dhcp_staticip_set_mac
Set dhcp staticip's mac <macaddradd macaddress>
set dhcp_staticip_set_mac
set dhcp_wins
Set dhcp server wins ip
set dhcp_wins
set dhcp_force_broadcast
Set dhcp server force broadcast states
set dhcp_force_broadcast