D-Link DAP-2695 Command Line Interface Reference Manual

802.11 b/g /n Access Point Command Line Interface Manual
6
2
COMMAND SYNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the
CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Encloses a variable or value that must be specified.
Syntax
set ssid <ssidname>
Description
In the above syntax example, you must specify the
ssidname. Do not type the angle brackets.
Example Command
set ssid dap2695
[square brackets]
Purpose
Encloses a required value or set of required arguments.
One value or argument can be specified.
Note: All commands are case-insensitive.

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm