D-Link DAP-2695 Command Line Interface Reference Manual

802.11 b/g /n Access Point Command Line Interface Manual
12
5
WIRELESS COMMANDS
Fundamental
Get Command:
Function
Syntax
get apmode
Display AP Operate Mode
get apmode
get band
Display current Band
get band
get ssid
Display Service Set ID
get ssid
get ssidhidden
Display SSID hidden Mode as enabled or disabled
get ssidhidden
get autochannel
Display AutoChannel
get autochannel
get channel
Display Channel
get channel
get ch_env
Display channel environment
get ch_env
get availablechannel
Display available channel list
get availablechannel
get cwm
Display CWM
get cwm
get wireless
Display Wireless
get wireless
get wlmode_db
Display Wlmode
get wlmode_db
get beaconinterval
Display Beacon Interval
get beaconinterval
get dtim
Display Delivery Traffic Indication Message Beacon Rate
get dtim
get txpower
Display Txpower
get txpower
get wmm
Display WMM
get wmm
get uapsd
Display UAPSD Status
get uapsd
get acktimeout
Display ACKTIMEOUT
get acktimeout
get shortgi
Display Shortgi
get shortgi
get igmpsnoop
Display IGMP Snoop
get igmpsnoop

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm