D-Link DAP-2695 - Multi-SSID

802.11 b/g /n Access Point Command Line Interface Manual
27
set agingbyrssi
Set aging out by rssi status
set agingbyrssi
set agingbydatarate
Set aging out by datarate status
set agingbydatarate
set aclbywlmode
Set acl by wlan mode status
set aclbywlmode
set aclbywlmodeperssid
Set acl by wlan mode status per ssid
set aclbywlmodeperssid
set aclbyrssi
Set acl by rssi status
set aclbyrssi
set agingbyrssithreshhold
Set aging out by rssi threshhold
set agingbyrssithreshhold
set aclbyrssithreshhold
Set acl by rssi threshhold
set aclbyrssithreshhold
set agingbydataratethreshhold
Set aging out by datarate threshhold
set agingbydataratethreshhold
set multi-agbyrssiordrstatus
Set aging out by datarate status
set multi-agbyrssiordrstatus
set acctstate
Set Accounting state
set acctstate
set acctip
Set Accounting server IP address
set acctip
set acctport
Set Accounting port number
set acctport
set acctsecret
Set Accounting shared secret (size:1--64)
set acctsecret [1--64]
set backup-acctip
Set Backup Accounting server IP address
set backup-acctip
set backup-acctport
Set Backup Accounting port number
set backup-acctport
set backup-acctsecret
Set Backup Accounting shared secret (size:1--64)
set backup-acctsecret [1--64]
set backup-radiusip
Set Backup RADIUS IP address
set backup-radiusip
set backup-radiusport
Set Backup RADIUS port number
set backup-radiusport
set backup-radiussecret
Set Backup RADIUS shared secret (size:1--64)
set backup-radiussecret [1--64]