D-Link DAP-2695

802.11 b/g /n Access Point Command Line Interface Manual
26
get radiusip
Display RADIUS server IP address
get radiusip
get radiusport
Display RADIUS port number
get radiusport
get radiuscli_auth_status
Display RADIUSClient Auth status
get radiuscli_auth_status
get agbyrssiordrstatus
Display aging out by rssi/data rate status
get agbyrssiordrstatus
get aclbywlmode
Display acl by wlan mode status
get aclbywlmode
get aclbywlmodeperssid
Display acl by wlan mode status per ssid
get aclbywlmodeperssid
get aclbyrssi
Display acl by rssi status
get aclbyrssi
get agingbyrssithreshhold
Display aging out by rssi threshhold
get agingbyrssithreshhold
get aclbyrssithreshhold
Display acl by rssi threshhold
get aclbyrssithreshhold
get agingbydataratethreshhold
Display aging out by datarate threshhold
get agingbydataratethreshhold
Set Command:
Function
Syntax
set acl
Set ACL
set acl
set macaddradd
Add MAC Addr <macaddradd macaddress>
set macaddradd
set macaddrdel
DEL MAC Addr <macaddrdel macaddress>
set macaddrdel
set ethlink
Set ethernet integration
set ethlink
set trafficmgr
Set Traffic Manager
set trafficmgr status [enable/disable]
set e_partition
Set e_partition
set e_partition
set w_partition
Set w_partition
set w_partition
set radiusClient
Set RADIUS Client Status
set radiusClient
set radiusCliSerIp
Set RADIUSClient's RADIUS IP address
set radiusCliSerIp
set radiusCliSersecret
Set RADIUSClient's RADIUS shared secret (size:1--64)
set radiusCliSersecret [1--64]
set radiusCliUserName
Set RADIUSClient's User Name
set radiusCliUserName
set radiusCliUserPass
Set RADIUSClient's Password (size:1--64)
set radiusCliUserPass [1--64]
set radiusip
Set RADIUS IP address
set radiusip
set radiusport
Set RADIUS port number
set radiusport
set radiussecret
Set RADIUS shared secret (size:1--64)
set radiussecret [1--64]
set agbyrssiordrstatus
Set aging out by datarate status
set agbyrssiordrstatus