D-Link DAP-2695 Command Line Interface Reference Manual

802.11 b/g /n Access Point Command Line Interface Manual
9
Administration Command:
Function
Syntax
get uptime
Display UpTime
get uptime
get time
Display time
get time
pwd
Print name of current/working directory
pwd
set apply
Apply the seting
set apply
set time
Set time (year month day hour min sec)
set time [year month day hour min
sec]
clear language-pack
Clear language pack
clear language-pack
set inact
Set the value of a specific inact
set inact
TFTP Command:
Function
Syntax
tftp getconfig
Use tftp to get configuration from PC
tftp getconfig
tftp getfirmware
Use tftp to get Firmware from PC
tftp getfirmware
tftp putconfig
Use tftp to put configuration to PC
tftp putconfig
tftp getxmlconfig
Use tftp to get xml configuration from PC
tftp getxmlconfig
tftp putxmlconfig
Use tftp to put xml configuration to PC
tftp putxmlconfig
Web Command:
Function
Syntax
get web
Display WEB Information
get web
set web
Set WEB Status
set web
set webredirect
Set Web Redirect
set webredirect

D-Link DAP-2695 Specifications

Operating Environment

operating temperature	0˚C to 40˚C
storage temperature	-20˚C to 65˚C
operating humidity	10%~90% (non-condensing)
storage humidity	5%~95% (non-condensing)

Power

operating voltage	48V DC +/- 10% for PoE
voltage and current for PoE	48V/0.5A

Wireless Specifications

wireless frequency range	2.4 to 2.4835 GHz and 5.15 to 5.85 GHz
antenna type at 2.4GHz	3x Detachable 4 dBi Omni antennas
antenna type at 5GHz	3x Detachable 6 dBi Omni antennas

Weight and Dimensions

length	198.8 mm
width	190 mm
height	36.5 mm