62D-Link DCS-7010L User Manual
Section 4: Conguration
Add Event
Create and schedule up to 2 events with their own settings here. After making any changes,
click the Save Settings button to save your changes.
Event name:
Enable this event:
Priority:
Delay:
Trigger:
Digital Input:
Video Motion Detection:
Periodic:
System Boot:
Network Lost:
Time:
Server:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with higher
priority will be executed rst.
Select the delay time before checking the next event. It
is being used for both events of motion detection and
digital input trigger.
Specify the input type that triggers the event.
Initiates recording after receiving a digital input event.
Motion is detected during live video monitoring. Select
the windows that need to be monitored.
The event is triggered in specied intervals. The trigger
interval unit is in minutes.
Triggers an event when the system boots up.
Triggers an event when the network connection is lost.
Select Always or enter the time interval.
Specify the location where the event information should
be saved to.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
