19D-Link DCS-934L User Manual
Section 2 - Installation
Mac Users
When you select the DCS-934L from the mydlink support page, you will see a list of setup
wizards. Download the Mac OS Setup Wizard.
Within 20-30 seconds, the Setup Wizard will open. The wizard will guide you step-by-
step through the installation process, from connecting your hardware to conguring
your camera and registering it with your mydlink account.
Click Start to begin.
Open the SetupWizard le and launch the application.
Note: If you experience issues registering this device with your mydlink account, perform
a hard reset by pressing and holding the reset button on the device for 10 seconds while
the device is powered on.
Setup Wizard
To Next Page
Loading...
