D-Link DCS-934L User Manual

38D-Link DCS-934L User Manual
Section 4 - Conguration
Mail
SMTP Server
Address:
SMTP Server
Port:
Sender E-mail
Address:
Receiver E-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail server.
This is the port used by your external e-mail server.
This is the e-mail address of the account sending the camera images.
This is the e-mail address to send the images to.
If the SMTP server uses authentication, you must enter your User Name here.
Enter the Password that corresponds to your user name to connect to the SMTP
server.
This section allows you to congure the e-mail notication settings for your camera.
For example, if you want to use Gmail by SSL-TLS for e-mail notication, you can follow these steps:
Step 1 - Enter smtp.gmail.com in the SMTP Server Address eld.
Step 2 - Change the SMTP Server Port number from 25 to 465.
Step 3 - Enter your gmail E-mail Address in Sender E-mail Address.
Step 4 - Enter the destination E-mail Address in Receiver E-mail Address.
Step 5 - Enter the User Name required to access the SMTP server.
Step 6 - Enter the Password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click Test at the bottom of the screen to send a test e-mail to the Receiver E-mail Address.
Note:
• If you want to use STARTTLS, use SMTP server port 587.
• If you want to use the Yahoo SMTP server, the SMTP server address will be dierent
between each registered region. It only supports using SMTP server port 465 for SSL-
TLS.

D-Link DCS-934L Specifications

General

Brand	D-Link
Model	DCS-934L
Category	Security Camera
Language	English