D-Link DCS-934L - Image Setup

33D-Link DCS-934L User Manual
Section 4 - Conguration
Image Setup
Check this box to enable anti icker. (Only enable this feature if you are noticing
that the video appears to icker.)
Check this box to ip the video vertically.
Check this box to ip the video horizontally.
Note: If the camera is installed upside-down, both Flip Image and Mirror should be
checked.
Select a number from the drop-down menu to adjust the brightness level.
Select a number from the drop-down menu to adjust the contrast level. Adjusting
this setting will alter the color intensity.
Select a number from the drop-down menu to adjust the saturation level.
Click Save Settings to save your settings.
Enable Anti
Flicker:
Flip Image:
Mirror:
Brightness
Control:
Contrast Control:
Saturation
Control:
This section allows you to congure the image settings for your camera.