D-Link DCS-934L - System Settings

45D-Link DCS-934L User Manual
Section 4 - Conguration
System
This section allows you to save and restore your conguration, restore the factory default settings, and reboot the camera.
Save To Local
Hard Drive:
Load From Local
Hard Drive:
Restore To
Factory Default:
Reboot The
Device:
You may save your current camera conguration as a le on your computer by
clicking Save Conguration.
Locate a pre-saved conguration by clicking Choose File and then restore the
pre-dened settings to your camera by clicking Restore Conguration from
File.
You may reset your camera and restore the factory settings by clicking Restore
Factory Defaults.
This will restart your camera.