D-Link DCS-936L

29D-Link DCS-936L User Manual
Section 3 - Conguration
Enable:
Only During:
Video Clip
Type:
Target:
Check this box to enable the Video Clip function.
Check this box to setup a scheduled timeframe when video clips should
be sent. This is useful if you do not want to be notied when it would
otherwise be inconvenient, such as at night or on weekends.
The Video Clip Wizard uses Prole 2 by default. More information about
video proles can be found in Audio and Video on page 36. You can
set the le type from the drop down menu. You can also specify how
many seconds before the event that triggered recording should be sent,
as well as how long the maximum duration of the video clip should be
in seconds.
Select where you want the video clip to be sent. Enter the settings for
your e-mail account.
Click Next to continue.
Video Clip Notications is a feature to send video clips via e-mail when motion is detected.