Example usage:
To set up static router ports:
Figure 95. config router_ports command (add static router ports)
To delete static router ports:
Figure 96. config router_ports command (delete static router ports)
enable igmp snooping
Purpose
Used to enable IGMP snooping on the Switch.
Syntax
enable igmp snooping {forward_mcrouter_only}
Description
This command allows you to enable IGMP snooping
on the Switch. If forward_mcrouter_only is specified,
the Switch will only forward all multicast traffic to the
multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
Parameters
None.
103
To Next Page
Loading...
