IDENTIFYING EXTERNAL COMPONENTS
This chapter describes the front panel, rear panel and LED indicators
of the Switch
Front Panel Components
The front panel of the Switch consists of eight (8) 10/100Mbps Fast
Ethernet ports, one (1) 10/100/1000Mbps Gigabit Ethernet port, one
(1) mini-GBIC port, LED indicators and Reset button.
Figure 4. Front panel view
Port 1~8: Eight 10/100Mbps Fast Ethernet ports.
Port 9: One 10/100/1000Mbps Gigabit Ethernet ports (port 9).
Port 10: One mini-GBIC port (port 10)
LED Indicators: Comprehensive LED indicators that display the
conditions of the Switch and status of the network. A description of
these LED indicators follows (see LED Indicators).
Reset: The Reset button is to reset all the setting back to the factory
default.
Note: Be sure that you recorded the setting of your device, else all the setting will
be erased when pressing the “Reset” button.
13
To Next Page
Loading...
