Need help?Do you have a question about the D-Link DES-2110 and is the answer not in the manual?
Introduction to the user's guide, defining terms and outlining its structure.
Lists the items typically found in the switch's shipping carton.
Details fundamental setup steps, including placement and power connection.
Describes the front panel's ports, LED indicators, and reset button.
Explains the Web Management Utility for discovering, configuring, and upgrading the switch.
Step-by-step guide to installing the Web Management Utility from the CD-ROM.
Explains discovering and adding devices to the monitor list using the Discovery List.
Describes Monitor Save, Save As, Load, and Exit functions in the File tab.
Lists functions configurable via web browser: Port Setting, VLAN, Spanning Tree, SNMP, etc.
Alternative access method using the Web Management Utility to connect to the switch.
Explains entering the default password 'admin' to access the main configuration window.
How to configure port speed, flow control, QoS, and link status for each port.
Instructions for creating and managing port-based VLAN groups.
Explains SNMP traps as alerts for switch events like boot-up or port status changes.
Instructions for adding new SNMP community strings and removing existing ones.
Instructions for adding trap recipients and removing SNMP trap configurations.
Enabling/disabling Static MAC function and disabling auto-learning for specific ports.
Procedure for adding static MAC address rules with specific port assignments.
Enabling/disabling IGMP snooping and configuring host/router timeouts.
How to determine or set the switch's IP address, potentially using the Web Management Utility.
Shows the login prompt and default password ('admin') for the CLI.
Details hardware warranty service, including repair/replacement, RMA process, and packaging.
Questions about product usage, network protocols, and operating systems.
To Next Page
General