97
Example usage:
To delete the SNMP community string “admin”:
Figure 89. delete snmp community command
show snmp community
delete snmp community
Purpose
Used to remove a specific SNMP community
string from the Switch.
Syntax delete snmp community <community_string
20> [ read_only | read_write ]
Description
This command is used to remove a previously
defined SNMP community string from the Switch.
Parameters <community_string 20> - Specifies which
previously created SNMP community to be
delete.
read_only - Specifies which previously created
SNMP community of read_only to be delete.
read_write - Specifies which previously created
SNMP community of read_write to be delete.
To Next Page
Loading...
