Figure 12. Firmware Upgrade
Web Access:
Double click the device in the Monitor List or select a device in the
Monitor List and press this “Web Access” button to access the device
in Web browser.
Toolbar
The toolbar in the Web Management Utility have four main tabs, File,
View, Options and Help.
File TAB:
In the “File TAB”, there are Monitor Save, Monitor Save As, Monitor
Load and Exit:
Monitor Save: To record the setting of the Monitor List to the default,
when you open the Web Management Utility next time, it will auto
load the default recorded setting.
Monitor Save As: To record the setting of the Monitor List in
appointed filename and file path.
25
To Next Page
Loading...
