Purpose
Used to display SNMP community strings
configured on the Switch.
Syntax show snmp community
Description
This command is used to display SNMP
community strings that are configured on the
Switch.
Example usage:
To display the currently entered SNMP community strings:
Figure 90. show snmp community command
create snmp host
Purpose
Used to create a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Syntax create snmp host <ipaddress> {vid <vlan_id>}
trap_community <community_string>
Description
This command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent
98
To Next Page
Loading...
