Once you want to modify the VLAN Group, check on the ID
parameter, the ID VLAN configuration window will pop out.
Figure 21. Port_based VLAN Settings
IEEE 802.1Q VLAN:
VID Table Setting: select the VID group that you set.
When you select VID Table Setting, press “Add new VID” to create
new VID group, from port 01 ~ port 10, select Untag Port, Tag Port or
Not Member for each port. To save the VID group, press “Apply”
button. To remove the selected VID group, select the VID group and
press “Remove the VID” button. To modify the VID group setting,
select the VID group and change the setting, and press “Apply” button
to save the settings.
Figure 22. 802.1Q VID Table Setting
34
To Next Page
Loading...
