74
config vlan
Purpose
Used to additional ports to a previously
configured VLAN.
Syntax config vlan [<vlan_name 8> | tag <vlanid
1~4094> add {tagged | untagged} | delete
<portlist>]
Description
This command allows you to add ports to the port
list of previously configured VLAN.
Parameters
<vlan_name 8> - The name of the Port_based
VLAN you want to add/delete ports to/from.
<vlanid 1 ~ 4094> - The VLAN ID of the
802.1Q_based VLAN you want to add/delete ports
to/from.
tagged - Specifies the additional ports as tagged.
untagged - Specifies the additional ports as
untagged.
add - Entering the add parameter will add ports to
the VLAN
delete - Delete ports from the specified VLAN.
<portlist> - A port or range of ports to add to, or
delete from the specified VLAN.
Example usage:
To add port 1, 3, 5, 6 to the “sales” VLAN group:
Figure 66. config vlan command, add VLAN group members (port_based VLAN)
To Next Page
Loading...
