Example usage:
To view the current IGMP snooping group:
Figure 100. show igmp_snooping command
config igmp_snooping
Purpose
Used to configure IGMP snooping on the Switch.
Syntax config igmp_snooping [host_timeout <sec 1-
16711450> | router_timeout <sec 1-
16711450>]
Description
This command allows you to configure IGMP
snooping on the Switch.
Parameters host_timeout <sec 1-16711450> − Specifies the
maximum amount of time a host can be a
member of a multicast group without the Switch
receiving a host membership report. The default
is 260 seconds.
router_timeout <sec 1-16711450> − Specifies
the maximum amount of time a route can be a
member of a multicast group without the Switch
receiving a host membership report. The default
is 125 seconds.
106
To Next Page
Loading...
