DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Reauthenticate Port(s) for MAC-based 802.1x
To reauthenticate ports for the MAC side of 802.1x, the user must first enable 802.1x by MAC address in the Advanced
Settings window. Click Security > 802.1X > Reauthenticate Port(s) to view the following window:
Figure 10- 19. Reauthenticate Ports – MAC based 802.1x
To reauthenticate ports, first choose the range of ports in the From and To field. Then the user must specify the MAC
address to be reauthenticated by entering it into the MAC Address field and checking the corresponding check box. To
begin the reauthentication, click Apply.
RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection
against a sniffing, active hacker. The Web Manager offers three windows.
Click Security > 802.1X > RADIUS Server to open the Authentic RADIUS Server Setting window shown below:
Figure 10- 20. Authentic RADIUS Server and Current RADIUS Server Settings Table window
This window displays the following information:
130
To Next Page
Loading...
