DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Port Err-Disabled
The following window is used to view information about ports that have had their connection status disabled, because of a
STP LoopBack detection. To view the following window, open the Administration folder and click the Port Error
Disabled link.
Figure 6- 5. Port Error Disabled window
The following information can be viewed in the preceding window:
Parameter Description
Port
Denotes the port on the Switch that has been disabled.
State
Describes the current running state of the port in question, whether enabled or disabled.
Connection
Describes the current running state of the port in question. This field will read err-
disabled when a port has been disabled due to connection errors.
Reason
Describes the reason for the error of the current running state of the port, which is STP
LBD or Spanning Tree LoopBack Detection.
Description
Displays the pre-configured description of the port, configured by the user.
34
To Next Page
Loading...
