DES-3550 Layer 2 Fast Ethernet Switch
delete link_aggregation group_id
Purpose Used to delete a previously configured link aggregation group.
Syntax
delete link_aggregation group_id <value 1-6>
Description This command is used to delete a previously configured link
aggregation group.
Parameters
<value 1-6> − Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete link aggregation group:
DES-3550:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3550:4#
152
To Next Page
Loading...
