DES-3550 Layer 2 Fast Ethernet Switch
config time
Purpose Used to manually configure system time and date settings.
Syntax
config time <date ddmmmyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters date – Express the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the
month, and four numerical characters for the year. For example:
03aug2003.
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Restrictions Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
Example usage:
To manually set system time and date settings:
DES-3550:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DES-3550:4#
221
To Next Page
Loading...
