DES-3550 Layer 2 Fast Ethernet Switch
config arp_aging time
Purpose Used to configure the age-out timer for ARP table entries on the
Switch.
config arp_aging time <value 0-65535>
Description This command sets the maximum amount of time, in minutes, that
an ARP entry can remain in the Switch’s ARP table, without being
accessed, before it is dropped from the table.
Parameters
time <value 0-65535> − The ARP age-out time, in minutes. The
value may be set in the range of 0-65535 minutes with a default
setting of 20 minutes.
Restrictions Only administrator-level users can issue this command.
Syntax
Example Usage:
To configure ARP aging time:
DES-3550:4#config arp_aging time 30
Command: config arp_aging time 30
Success.
DES-3550:4#
234
To Next Page
Loading...
