DES-3550 Layer 2 Fast Ethernet Switch
To create an SNMP user on the Switch:
DES-3550:4#create snmp user dlink default encrypted by_password
auth md5 canadian priv none
Command: create snmp user dlink default encrypted by_password
auth md5 canadian priv none
Success.
DES-3550:4#
delete snmp user
Purpose
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
Syntax delete snmp user <username 32>
Description The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
Parameters
<username 32> − An alphanumeric string of up to 32 characters that
identifies the SNMP user that will be deleted.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-3550:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3550:4#
36
To Next Page
Loading...
