DES-3550 Layer 2 Fast Ethernet Switch
show snmp user
Purpose Used to display information about each SNMP username in the
SNMP group username table.
Syntax
show snmp user
Description
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3550:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- -------------- ------------ ----------------- -----------------
initial initial V3 None None
Total Entries: 1
DES-3550:4#
37
To Next Page
Loading...
