DES-3550 Layer 2 Fast Ethernet Switch
delete snmp community
Purpose Used to remove a specific SNMP community string from the Switch.
Syntax
delete snmp community <community_string 32>
Description
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DES-3550:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3550:4#
42
To Next Page
Loading...
