DES-3550 Layer 2 Fast Ethernet Switch
show snmp community
Purpose Used to display SNMP community strings configured on the Switch.
Syntax
show snmp community {<community_string 32>}
Description
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
DES-3550:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------------------- ------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
DES-3550:4#
43
To Next Page
Loading...
