DES-3550 Layer 2 Fast Ethernet Switch
config snmp engineID
Purpose
Used to configure a name for the SNMP engine on the Switch.
Syntax
config snmp engineID <snmp_engineID>
Description
The config snmp engineID command configures a name for the SNMP engine on the
Switch.
Parameters
<snmp_engineID> − An alphanumeric string that will be used to identify the SNMP engine
on the Switch.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To give the SNMP agent on the Switch the name “0035636666”
DES-3550:4#config snmp 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3550:4#
show snmp engineID
Purpose Used to display the identification of the SNMP engine on the Switch.
Syntax
show snmp engineID
Description
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the current name of the SNMP engine on the Switch:
DES-3550:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-3550:4#
44
To Next Page
Loading...
