DES-3550 Layer 2 Fast Ethernet Switch
show snmp traps
Purpose Used to show SNMP trap support on the Switch .
Syntax
show snmp traps
Description This command is used to view the SNMP trap support status
currently configured on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the current SNMP trap support:
DES-3550:4#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Traps : Enabled
DES-3550:4#
56
To Next Page
Loading...
