D-Link DES-3550 - Page 61

DES-3550 Layer 2 Fast Ethernet Switch
disable snmp traps
Purpose Used to disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description This command is used to disable SNMP trap support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DES-3550:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3550:4#
disable snmp authenticate_traps
Purpose Used to disable SNMP authentication trap support.
Syntax
disable snmp authenticate_traps
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support:
DES-3550:4#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DES-3550:4#
57