D-Link DES-3550 - Page 63

DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To configure the Switch location for “
HQ 5F ”:
DES-3550:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3550:4#
config snmp system_name
Purpose Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description The config snmp system_name command configures the name of the Switch.
Parameters <sw_name> - A maximum of 255 characters is allowed. A NULL string is accepted
if no name is desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch name for “
DES-3550 Switch ”:
DES-3550:4#config snmp system_name DES-3550 Switch
Command: config snmp system_name DES-3550 Switch
Success.
DES-3550:4#
59