DES-3550 Layer 2 Fast Ethernet Switch
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose Use this to deactivate autoconfiguration from DHCP.
Syntax
disable autoconfig
Description This instructs the Switch not to request autoconfiguration instruction from
the DHCP server. This does not change the IP settings of the Switch. The
ipif settings will continue as DHCP client until changed with the config ipif
command.
Parameters None.
Restrictions None.
Example usage:
To stop the autoconfiguration function:
DES-3550:4#disable autoconfig
Command: disable autoconfig
Success.
DES-3550:4#
72
To Next Page
Loading...
